Specially
formulated product designed to promote adhesion to many difficult surfaces. Promotes the adhesion of wallcoverings and
emulsion paints.
Reduces seam
splits, raised edges and bubbling of wallcoverings.
Seals
absorbent materials.
Primer ACP
is not suitable on non-absorbent surfaces (ceramic, glass, metal, gloss paint
etc.)
Surface Preparation
Walls should be
sound, dry, clean and free from damp, dust and grease or any contaminant that
might affect adhesion.
Allow new plaster
to dry out completely.
Application
Seltex Primer ACP should be diluted with water dependent on
the surface being primed. Stir before
use, apply one coat only by brush and allow to dry before adhesive application.
It is recommended that a good bond has been achieved between
Primer ACP and the surface before commencing hanging.
2 or 3 drops only should be hung and allowed to dry prior to
completion to ascertain that a satisfactory bond is being achieved.
Dilution Rate
1 part Primer ACP to 4/5 parts water.
Coverage
1:4 approximately 40 sq metres / kg
Cleaning and Storage
Tools and
equipment should be cleaned with water immediately after use.
Do not use
at a temperature below 12°C (54°F).
PROTECT FROM
FROST
Safety Information
Primer ACP should be kept away from children and animals.
1 Kg Primer ACP
-
£54.00/m²
Tags: Primer Sealer